The #10 Portable Baptistry Heater is sold exclusively at Calvary Supply Company

and is the newest, most cost effective design available.

Did you know?

The #10 Portable Baptistry Water Heater will heat 100 gallons by a 20° rise in temperature each 9-12 hours, depending on ambient (room) temperature, not to exceed 105°F.  Water comes from the ground at 54°F

To get the average portable pool to a correct temp for baptizing will take overnight or all day heating, more if the room is cold.

Portable Baptistry Heater #10

 120 V Electric Immersion Water Heater

US Patent Pending

This is a new style heater designed for portable baptistries. 

It will heat 100 gallons of water to about 100° F overnight. 

Instructions

•  Designed for easy, safe use

• Will not burn out if left out of water

• The outer surface never overheats

• Manufactured with Teflon® heating element

• Internal elements are ceramic

• 33" long x 2-3/4" Diameter

• Energy Efficient - uses 1/3 the electricity of other heaters

• 1000 Watts ●120 volts standard electric ● 8.3 Amps

• Uses only 2-3 amps during heating 

• Preset thermostat cuts on at 85° off at 105°

• Silicone bumpers allow unit to rest without touching fiberglass

• Built in GFCI (ground fault circuit interrupter) for safety

• Just place in water, lay down, and plug in 12-24 hours before use

• Note it does not circulate the water, so you may need to stir it before the service

• For added safety, remove from pool before baptism service or use

• For faster heating of the water, select the 240V immersion heater

• Our 120V immersion heater is also great for portable baptistries

          Sales Tax  $0.00    

(If your church is in VA, fax us this tax form to 1-800-383-5923)

*Free shipping to 48 US states.  AK and HI add $29.95.  Outside the US? Call us.