This model available in either a 120V or 240V system.  The only difference is the plug.

Our Most Popular Design - Electric Immersion Water Heater

There are two models available from ChurchRite

240 Volts Single Phase  or 120 V System  
Both are Designed For Easy, Low Cost Installation

Applications:
The 240V unit is ideally engineered for fast heat-up in water.

The 240V unit is great for baptistries up to 750 Gallons.    For larger baptistries, if you cannot use a circulation heater, order 2 of these.

The 120 V unit is ideal for areas where only 120V current is available.

The 120 V unit is ideal for portable baptistries up to 150 gallons.

Another optional heater is also available for portable baptistries.

For larger baptistries over 150 gallons - order two of the 120V or the 240V model.  The 240V model has 4 times the heater capacity of the 120V!

The difference in the 240V and 120V is the plug style and how much water it will heat. Keep in mind the 240V has 4 times the heating power of the 120V. Brochure for models 120V and 240V.

Construction Features

• Immersion section of unit made of Incoloy 800 / Stainless Steel.
• Incoloy 800 is a superior steel product, highly resistant to rust, chemicals, heat, corrosion, cracking and is extremely strong.
• All heat confined to the formed horizontal section for optimum heat efficiency. 
• Cold riser extends to the top of container where control housing is located.
• 3-Conductor cord set with polarized plug included for easy installation and wiring at no extra charge (240V).
• Adjustable vapor-proof thermostat control with temperature range off - 55°F to 115°F (± 3°).
• Annealed to inhibit corrosion from use in water
• 60" Power Cord - Compare with others at 42"
• Annealed for long term corrosion resistance
• Hi-Limit cut out switch set at 125°F (±4°).
• Stainless steel mounting bracket also supplied for easy mounting.
• Pilot light and on-off switch provided, indicates desired temperature when reached and breaks circuit when element is not in use. Saves electricity - Saves money.

Notes:

• Thermostatically controlled with adjustable temperature
• Completely automatic and portable - just plug in power Cord and operate.
• No cutting or damage to your present container.
• Always use Ground Fault Outlets or Circuit Breakers for installation 
• Unit can be suspended in middle, end or side of container. A bracket comes standard with the heater.
• No contractors required on standard IMER-6-42 Models
• The IMER240V will heat 60 GPH (40° R). A 750 to 1,000 gallon Baptistry can be heated in 13 to 17 hours, or one-half this time 20 degree rise in temperature. GPH = gallons per hour.
• The IMER120V Heater can be operated on standard household current, at 1.5KW and will heat 15 GPH (40°R) or 30 GPH (20°R).  Due to ambient heat loss into the room, allow 18-24 hours to heat a 100 gallon portable baptistry.
• 12 month manufactures warranty
• GFCI Versions Now Available with Built In GFCI Breaker!  Safer than ever!

Two Models:

Sales Tax  $0.00 outside of VA.     

(If your church is in VA, fax this tax form to 1-800-383-5923)

Estimated Shipping Time is 7-10 Business Days. Call for rush delivery.