Our Most Popular Design - Electric Immersion Water Heater

The Basic ChurchRite circulation baptistry heater kit includes the thermostatically controlled, heater, with the circulation pump and pump installation kit. This has been the standard style heater in use for over 60 years and is still a favorite. Includes high limit protection.  The units comes in two flavors, a 6KW unit and an 11.5KW unit.

Circulation Heater up close 6KW Circulation heater Our circulation pump for the baptistry heater in red



We take safety seriously at Calvary Supply and want to make every effort possible to provide you with the best possible safety practices where available.  
Installation and Instructions for the Basic Circulation Baptistry Heater
Returns Policy can be found here. NOTE- UPS Next Day Air Saver is not available for orders after 12:00 Noon EST. If you select that option after 12:00 Noon it will be processed the next business day.



The Basic circulation heater operates on a 240v Single Phase, but can operate on 208V at a 25% reduction in heating. The pump operates on 120V. PUMP MODEL MAY VARY FROM PHOTO.

These units attaches directly to the side of your baptistry, with water coming into the unit at the bottom, while being pumped out the top. (tub MUST be FILLED before using). This model is suggested for medium and full sized baptisteries.

GFCI that comes on some baptistry immersion units 120 volt Baptistry heater plug 240 volt plug for immersion heater
Typical Installation Diagram Thermostat Controller Reset button


6KW Unit:

GFCI that comes on some baptistry immersion units

The Basic Circulation system includes the 6KW (6,000 watts) heater with the circulation pump and installation kit. The unit heats approximately 100 gallons of water per hour to a 22 rise. Actual results will vary, depending on room temperature. For best results use a baptistery cover while heating. This model is suggested for baptisteries 600 gallons or smaller.


Part Number: 6KW-001 System List Price
CR 6KW 6KW Heater unit $360.00
PUMP-06-120V Circulation Pump No. 006 $180.00
PI Kit Pump Installation Kit $60.00
  LIST PRICE $600.00
  CALVARY DISCOUNT -$60.00
  Ground Shipping +$0.00
CR-6KW-001-KIT SALE PRICE $540.00


______________________________________________________________________________________________________________

11.5KW Unit:

GFCI that comes on some baptistry immersion units

ChurchRite's Basic 11.5KW (11,500 watts) baptistry heater kit includes the 11.5kw baptistry heater with the circulation pump and the pump installation kit which has various gaskets and fitting for installation purposes. The unit heats 200 gallons of water per hour on a 25 rise. Actual results will vary depending on room temperature. For best results use a baptistry cover to help keep the water warm and prevent people from touching the water during heating. This is suggested for baptisteries over 600 gallons or where you need faster warm water.
       
       
       

Part Number: 6KW-001 System List Price
CR 11.5KW 11.5KW Heater unit $470.00
PUMP-06-120V Circulation Pump No. 006 $180.00
PI Kit Pump Installation Kit $60.00
MDI60 60 AMP Contactor $68.00
AT140 Transformer $34.00
  LIST PRICE $812.00
  CALVARY DISCOUNT -$87.00
  Ground Shipping +$0.00
CR-11KW-001-KIT SALE PRICE $725.00



 Warning, safety first when using your baptistrySAFETY FIRST! NEVER Install a baptistry heater by yourself! ALWAYS have a certified and licensed professional to install any baptistry heater. Additionally you WILL NEED to adhere to any LOCAL BUILDING CODE in your area.